1.系列自动滴(滚)漆机(Armature Varnish Trickling Machine).主要应用在各种微型电机,家用电器电机,串激电机,电动工具电机,转子定子绝缘漆处理。 2.自动处理预热、滴(滚)漆、(包封)凝胶、固化各工序全部过程(除装卸外)，保证产品性能一致性。滴漆采用蠕动泵进口齿轮调速电机驱动精度高，操作简单，可靠性好，并节省绝缘漆， 3.自转采用进口变频调速技术，可根据不同转子直径调整自转速度，从而达到比匀速更理想的挂漆量。 4.浸出的工件 有良好的机械和电气性能。漆膜均匀，动平衡性能较好 。 5.烘道上、下两层加热，用隔热体隔开，加热采用辐射式，加热管均匀放地上、下两层，使烘干区温度均匀，上下可分别控温，能耗比热风循环式降低。从而达到省电节能升温 快的效果。       The machine is used to varnish trickle for an armature windings and the relative electrical components.　　Inside double tunnel, all the armatures can be moved forth and auto-rotated, thus getting an uniform varnish layer. The varnish thickness can be controlled by means of trickling time, pump speed, etc.. The work-piece is processed through reheating, balancing, trickling, flowing, gluing, solidifying in the equipment. Parameters can be regulated independently to meet the need of a variety usage.　　The trickled armature is specified by uniform varnish film, deep permeation, fine edge covering and high hi-pot and surface quality.　　Due to its high level of precision, stability, safety and efficiency. It is an ideal machine for micro-motor production line or single equipment manufacturing.  主要产品技术性能参数 序号名称单位ZX-252ZX-204ZX-180ZX-150ZX-130ZX-1101工位数 Workpiece quantity个5044083603002602202工位节距Workpiece distancemm7676767676763最大工件直径Core diametermm7070707070704烘道工作温度(可调)Heat temperature℃1601601601601601605升温时间Heat timemin≤30≤30≤30≤30≤30≤306总功率Rated input powerkw38/1932/1628/1525/1322/1120/107外型尺寸长x宽x高Dimensionm9.8*1.2*1.58*1.2*1.57*1.2*1.56*1.2*155*1.2*1.54.2*1.2*1.58重量Weightkg4500380035003000250020009标准节拍时间Working beat timeS609010012015018010产量个/班产2500210018001500130070011每工位加工工件数个866444 注:特殊要求可以单独设计、制造。 Remarks:Special requirements can also be met for design and manufacturing