[ 产品介绍 ]RSG-17 100 kHz～150 MHz 高频信号发生器  概述 RSG-17型高频信号发生器能满足生产线,业余爱好者及维修等多方面的的频率需求,操作者通过可调的内置调制频率便可准确的判断出所选频段.基本特性 频率范围   A段:100 kHz～300 kHzB段:300 kHz～1000 kHzC段:1 MHz～3.2 MHzD段: 3 MHz～10 MHzE段: 10 MHz～35 MHzF段:35 MHz～150 MHz (三次谐波可达到450 MHz )频率准确度:±5%输出电平:空载时约100 mV输出电平范围: 0 V～100 mV调制 1、内部:调幅约0～30%可调节2、频率范围:150 Hz～1.5 kHz3、外部:50Hz～20 kHz , 1 V峰值低频输出: 150 Hz～1.5 kHz ,约3 V , 1000阻挡电源: AC 110 V / 220 V (50 / 60Hz) , 8 W使用说明书：GENERAL DESCRIPTIONRSG-17 is an RF signal generat or which can generate Hi –frequency from 100KHz-150MHz.With it′s3th harmonic on range′F′,450MHz can be reached. As the modulating frequency can be adjusted from 150Hz to 1.5KHz and output terminal for AF as well,it can fulfil most requir em ent of ho bbyist,service station,production and technical instructruction. FEATURESWide Frequency range:100KHz-150MHzLow distortion AF oscillator installed suppling Amplitude Modulation(AM)With tunable range from 150Hz-1.5KHz.AF output terminal works as audio generator as well.ELECTRLCAL SPECIFICATIONSRange  A:100KHz-300 KHz       B:300 KHz-1000 KHz       C:1MHz-3.2 MHz       D:3 MHz-10 MHz       E:10 MHz-35 MHz       F:32 MHz-150 MHz         (up to 450 MHz with 3th harmonics)Frequency accuracy on scale:±5％RF output: Min 100mV rms(up to 35Mhzunloaded.)Output control: 1mV to 100mV(measured from output terminal)Modulation:Amplitude modulation(AM)30％approx.Audio output: Min2Vrms.Audio frequency: 150Hz-1.5KHzExtemal audio input: 50Hz-20KHz at less than 1Vrms input.Power Requirement: AC110/220V 50/60Hz approx.6VA1Dimension: 142(W)×233(D)×197(H)mm 3.5kgAccessories: Power Cord………………1pc         Test Clip…………………1pc         Instruction Manual………1pc                          2                           （1）      Dial scale Frequency tunning knob.（2）      Frequency range selectorA-F（3）      Internal/External modulation selector.（4）      Power On/Off.（5）      Modulation level adjust.（6）      RF level control.3（7）      Modulationfrequency adjust.（8）      RF output terminal.（9）      AF output/lnput termindl.（10）  Power ON indicator.（11）  AC power input socket with fuse holder.（12）  Lnput voltage selector.OPERATIONBefore input power to power socket(11),make sure TSG-17 has voitage selector(12)placed on suitabie position.(1) Press(4)down,(10)will be lit to show AC power is on.(2) Press (2)from A to F to select the frequency range which yon desire to work on.(3) Tune(1)to the actual frequency what you need.For accuracy tunning,a frequency Counter(TFC-1250)may be needed to indicate the actualoutput frequency.(4) To obtain the internal modulation,(3)should not be pressed down.ln the internal modulation mode,(9)will have AF signal out which have frequency controlled by (7).(5) Ln internal modulation mkde,modulating frequency can be adjusted by(7)while fully antl-clockwise to lowestfrequency and fully clockwise for highest frequency,modulation depthis controlling by(5).(6) Terminal(9)acts as AF outp utin l ntem al modulation mode while acts as AF lnput in extemal modula tion mode.modulation mode.(7) To have RF signal output,simply plugs in the BNC to crocodile clip cord to(8)as accessed. Output level can be controlled by turning(6)fully clokwise for maximum＆fully anti-clockwise for minimum output.