激光测距仪说明书 FEATURES OF THE LASER RANGE FINDER   技术参数特性 TECHNICAL CHARACTERISTICS1、光学类                  观察放大倍率：        6倍 1、Optics                   Magnification：     6x                                    物镜直径：           25mmObjective lens：    25mm                                    出瞳直径：                4mmExit pupil diameter：4mm                                    视 场：                    122m/1000m或133yad/1000yadField of view：     122m/1000m & 133yad/1000yad                                    膜 系：                    多层复合镀膜 Type of coating：   Fully multi-coated optics                                    棱镜类型：                4类屋脊棱镜 Type of prism：    Bak4 roof prism                                    调焦系统：                单目调焦 Focus system：     Eyepiece focusing2、激光类                  激光类型：                1类（人眼安全）2、Range Finder         Laser Type：       Class 1(eye safe)激光波长：        905nmLaser wavelength:   905nm            测程范围：                5～700mMeasuring range：  5～700m                                    距离精度：                通常状态±1m/yadAccuracy：        Normal condition±1m/yad                                    扫描模式：                有Scan mode：       Yes                                    单位转换：                米制/码制Meters/Yards display：Yes                                    目标反射等级指示：有Target quality indicator：Yes3、其它                      电池种类：                CR2型3V锂电3、Misc                      Battery：          CR2 battery DC3V                                    电池欠压指示：        有“Low Battery”indicator：Yes                                    显示器：                    透过式液晶显示器Display：         LCD indicator    总重量：                    162克Weight：          162g    外形尺寸：                75×40×110 mmDimensions：      75×40×110 mm显示界面介绍   DISPLAY SYSTEM⑴：测量结果值⑴：Measurement Result⑵：距离单位⑵：Units of Measurement（Yard or Meter）⑶：分划指示⑶：Reticle（cross or rectangular selectable）⑷：“扫描”模式字符指示⑷：Scan Mode Indicator⑸：“准备”字符指示⑸：Ready Indicator⑹：低电池电压字符指示(6)：“Low Battery”Indicator：Yes⑺：目标反射质量等级字符指示（兼作激光发射指示）⑺：Target Quality Indicator（Laser Active Indicator）使用说明书  OPERATION INSTRUCTIONS1、按下“ACTION/ON”电源键，打开电源。1、Depress the power button“ACTION/ON”to turn the power on.2、按下“MODE”模式键，切换选择距离单位M米制或Y码制。具有动态数据切换功能，即测回某一数据后，按住“模式”键，切换单位并自动转换数据并实时显示出来。2、Depress the mode button to change“Meters”to“Yards”. Dynamic data switching function receive the data, hold down the "mode" button, switch units and automatically convert data and real-time show.3、按下“ACTION/ON”执行键1次，即可开始测距1次，右上角有模拟激光发射的标志在循环闪烁，表示正在发射激光。测回的数据显示在正下方，同时显示目标反射质量的高低指示，共分5级，从左到右由5个小块组成，小块越多表示反射越强。脱靶时显示“――――”4个短横线，表示目标太远无法测回。数据显示会一直保持直到下次操作或者自动断电为止。3、Press the "ACTION / ON" button one time, and begin Ranging 1, the top-right corner of a simulated laser flashes signs in the loop, said it is launching laser. The data show that measurement is in the bottom, also showed that objective reflection of the level of quality instruction, is divided into five, from left to right by five small components, small reflection that the more the stronger. Distance show "----" 4 short horizontal line, that goal can not be measured too far back. Data show that will remain until the next operation or the power of automatically.4、按住“ACTION/ON”执行键不松开，则立即开始进行扫描连续测距，测量数据不断地刷新显示，直到松开按键为止。4、Hold down the "ACTION / ON" button non-release, immediately began to scan for location, continuously updated measurements show that up until the release button5、当电池快用完时，会在左上角显示一个电池符号，表示应该更换电池了。5、When the battery is running low, in the upper left corner will display a battery symbol, that the battery should be replaced.6、在主界面下，电源将在无任何操作的约30秒后自动断电。6、In the main interface, power supply will be no operation automatically after about 30 seconds off.