For lifting spindle, both lever and release types are available.Measurement range (0 - 20mm)Photo 1DimensionsOptionsSpecificationsModelD-10D-10SD-20D-20SRange10mm20mmResolution0.005mm(0.01mm)0.001mm0.005mm(0.01mm)0.001mmAccuracy (excludingquantized error)0.005mm0.002mm0.005mm0.003mmMeasuring forceLess than 1.0NLess than 1.5NCable length2mMounting methodø 8mm stem or 6.5mm hole on lug backContact pointM2.5 × 0.45 Sø 2.4mm cooper (X-2)Operating temperature0 - 40ºCWeight220g300gOutput Signal90º phase difference, 20µm pitch (R03-PB8M Tajimi connector)Compatible standardcountersC-500/C-700CM-5BC-5Discontinued(Only stock is supplied)C-5SDiscontinued(Only stock is supplied)C-5Discontinued(Only stock is supplied)C-5SDiscontinued(Only stock is supplied)CP-5DiscontinuedCP-5SDiscontinuedCP-5DiscontinuedCP-5SDiscontinuedOptions* Release (RE-4) Lifting lever (LL-1)* Dust proof rubber (BG-10)* Flat back (GB3-D1O), screws (S-110)* Customer must specify if application is up-side-down.  The measuring force changes when the gauge is inverted.* Release (RE-4)* Flat back (GB3-D20)* Customer must specify if application is ap-side-down.  The measuring force changes when the gauge is inverted.