本公司专业生产变压器，主要产品有引进开发具有国际水平的JBK5和JBK6系列单相隔离变压器、DSG系列三相隔离变压器（伺服变压器），SG系列数控机床专用电源变压器，JBK3和JBK4系列控制变压器、OSG系列自藕变压器(长时间工作)、DBK系列节能设备专用变压器、电抗器及各种电源设备配套的整流变压器等系列产品。DSG1系列三相干式（隔离式）变压器是我公司多年来采用优质材料和先进技术专业生产100VA到300KVA之间。它们的外形尺寸和安装尺寸已经标准化，与西门子4AP通用，产品符合VDE0550、IEC204-1、IEC439、JB5555、GB5226等国际、国家标准。适用于交流50-60HZ输入、输出电压不超过500V各种三相供电场所。系空气自冷式，具有体积小、重量轻、绝缘耐热、等级高的特点。本公司设计此系列产品采用进口优质冷轧硅钢片，结构合理，性能好，效率高，噪声低。 DSG1系列三相干式（隔离式）变压器采用三柱式铁芯，产品有各种输入、输出电压的高低、联接组别、调节抽头的多少位置（一般为±5%或±10%）。原、付线圈之间绝缘良好，并采用隔离，使付边的电路免受电网及外界高频电磁波的干扰。DSG1系列三相数控机床主轴变压器广泛用于各类数控机床、加工中心、数控设备的数控系统和主轴电机的电压变换及其出口设备控制电源之用。可用于发那科、西门子、华中、三菱、航天等伺服数控系统和主轴电机，发那科、西门子、三菱、富士、松下等伺服电机匹配使用。l        UseDSG1 series of dry-type three-phase (isolated) transformer is our company over the years using high-quality materials and advanced technology specializing in the production of between 100VA to 300KVA. Their outside dimensions and installation dimensions have been standardized, and Siemens 4AP GM, products conform to VDE0550, IEC204-1, IEC439, JB5555, GB5226 and other international, national standards. Applicable to the exchange of 50-60HZ input, the output voltage does not exceed three-phase 500V power supply all kinds of places. Department of the Air Self-cooling, with a small size, light weight, heat insulation, high-grade characteristics. The Company designed this series of products adopt high quality cold-rolled silicon steel imports, a rational structure, good performance, high efficiency, low noise.DSG1 series of dry-type three-phase (isolated) transformer core by three-column, the product has a variety of input and output voltage level, connecting groups, adjusting the number of tap position (typically ± 5% or ± 10%). The original, to pay a good insulation between the coil and the use of isolation, so pay the edge of the circuit from external power grids and high-frequency electromagnetic interference.DSG1 series three-phase transformer axis CNC machine tool widely used in various types of CNC machine tools, machining centers, CNC equipment, CNC system and the spindle motor voltage transformation and export of equipment used to control power. Can be used in Fanuc, Siemens, Central China, Mitsubishi, aerospace CNC servo system and the spindle motor, Fanuc, Siemens, Mitsubishi, Fuji, Panasonic, etc. to match the use of servo motors.