图片仅供参考        ULINK2不仅具有ULINK仿真器的所有功能，还增加了串行调试（SWD）支持，返回时钟支持和实时代理等功能。开发工程师通过结合使用RealView MDK的调试器和ULINK2，可以方便的在目标硬件上进行片上调试(使用on-chip JTAG，SWD和OCDS)、Flash编程… ULINK2 新特点 标准Windows USB驱动支持ULINK2即插即用 支持基于 ARM Cortex-M3的串行调试 支持程序运行期间的存储器读写、终端仿真和串行调试输出 支持10-pin 连接线 (也支持20-pin 连接线)ULINK2主要功能： USB通讯接口高速下载用户代码 存储区域/寄存器查看 快速单步程序运行 多种程序断点 片内Flash编程Technical SpecificationsFeatureULINK2DebuggingRAM BreakpointsUnlimitedROM Breakpoints (ARM7/9)2 maxROM Breakpoints (Cortex-M3)6 maxROM Breakpoints (µPSD)(Cannot Set While Executing)5 maxROM Breakpoints (XC800)(Cannot Set While Executing)4 maxROM Breakpoints (XC166)4 maxExecution Breakpoints(Set While Executing)Access Breakpoints (ARM7/9)2 max(R/W Only, With Value)Access Breakpoints (Cortex-M3)4 max(With Value)Access Breakpoints (µPSD)3 maxAccess Breakpoints (XC800)1 in IDATA maxAccess Breakpoints (XC166)1 maxTrace HistoryReal-Time AgentPerformanceJTAG Clock<= 10MHzJTAG RTCK Support(Return Clock)Memory R/W(Bytes/sec)≈ 28KFlash R/W(Bytes/sec)≈ 25KSingle-Step (Fast)(Instructions/sec)≈ 50发货清单:仿真器一台优质usb线一条20芯JTAG线一条资料光盘一张