间距:1.0mm SMT Pin数:10-100 A series of high density connectors with 1.27mm(0.050") spacing board-to-cable connector with 50 and 68 contacts as standard.Conforms to the American National Standards Institute(ANSI) as the standard interface for SCSI-II.Metal front shells are provided to shield against EMI.Insulator is made of polyester resin and glass fiber reinforced(UL 94V-0) providing superior heat and chemical resistance.The connector is housed in the metal bracket, the advantage is easy to take off from cable.Application to small computers and peripheral devices, O/A equipment, etc.Recognized UL under the component program of Underwriters Laboratories Inc.File No. E 112081.Certified by Canadian Standards Association, File No. LR 81373. Electrical:Rated Current: 1 AmpInsulation Resistance: 500 M ohms min.Contact Resistance: 35 m ohms max.Dielectric Withstanding Voltage: AC 250V (for 1 minute).Operating Temperature: -25ºC ~ +85ºC Mechanical:Insulator Material: PBT with glass-fiber reinforced(UL 94V-0)Contact Material: Phosphor bronze.