1.油箱为10L，较小，预计4～7天补一次油，可通过该表后面的补油脂泵补油；2.泵集成内置安全阀，溢出油脂回流到泵内；3.泵集成可目视油位指示器和电子低油位传感器；4.泵自带控制器，简便实用；5.泵内置电阻加热器，便于在低温环境使用；6.泵自带的控制器具有设置润滑循环间隙时间、泵工作时间、限制工作压力、显示润滑间隙时间和润滑工作时间、低油位报警、压力报警（即监控整个系统的工作状态）、润滑循环间隙时间计数以及自锁保护等功能。7.系统简单，所需零部件较少，泵外型美观，油脂排量适中，功率小，节电，安装启动方便；8.泵集成带过滤器的加油接头，补充润滑脂方便而且泵中的油脂较洁净，有益于减少故障并提高系统使用寿命；9.防护绝缘等级高，适用于较恶劣的工作环境.  Centralised Lubrication ImprovesRunnabilityThe high-quality SKF Multilube centralisedlubrication system prevents bearing failuresand improves the runnability of machinesand equipment. Due to a centralised lubricationsystem the lubrication result is alwaysoptimal, consequently reducing energy andlubricant consumption.Compact and Flexible SolutionAll relevant components and functions(control unit, pump, reservoir, directionalvalve and pressure monitoring) are integratedinto the modular pumping unit of theSKF Multilube lubrication system. Built-inheating enables operation and use evenunder demanding and cold circumstances.All SKF grease and oil dosers for singleand dual line systems can be used with theSKF Multilube lubrication system. Auxiliaryequipment such as spray and sliding surfacenozzles and lubrication brushes can be usedaccording to the lubrication needs.SKF Multilube pumping unit MLPReservoir4 l10 lMax. output 13 g/min 13 g/minReservoir 4 l 10 lMax. pressure 210 bar (3 045 psi) 210 bar (3 045 psi)Operation temperature range –30 to +70 °C ( –22 to +158 °F) –30 to +70 °C (–22 to +158 °F)Lubrication line connections R 1/4 in. R 1/4 in.Lubricant NLGI up to 2 NLGI up to 2Power supply 24 VDC, 115 VAC or 230 VAC 24 VDC, 115 VAC or 230 VACPower consumption 150 W 150 WProtection classification IP65 IP65Weight (full reservoir) 20 kg (44.1 lb) 28 kg (61.7 lb)Height of pump 448 mm (17.64 in.) 688 mm (27.09 in.)Width of pump 230 mm (9.06 in.) 230 mm (9.06 in.)Depth of pump 235 mm (9.25 in.) 235 mm (9.25 in.)